All Products
Robotic and automation sensors for 1D laser rangefinders (LIDAR), 2D scanning lasers or LIDARs, 3D time-of-flight cameras, digital compasses, programmable USB hub, programmable ethernet controlled relays, programmable USB controlled relays.
Devantech 8 Channel 1A USB Relay Module
Devantech 8 Channel 1A USB Relay Module
by Devantech Ltd (Robot Electronics)
Devantech relay board with 8 voltage-free contact relay outputs with a current rating of up to 1A each.
SKU# R296-USBRLY08
OVERVIEW
Powered and Controlled from the USB hub, the relays used on this board are premium ultra low power 50mW coil types, this means the boards current consumption is less than 100mA with all relays on. It has a low maximum current consumption of approximately 90mA with all relays on. The relays are SPCO (Single Pole Change Over) types. The normally open, normally closed and common pins are all available on the screw terminals.
Installation instructions are available from Devantech in the Downloads section. The USB-RLY08 will show up on a Unix based computer as a virtual serial port without the need to install any drivers.
FEATURES
- 8 relays
- Powered from standard USB bus
- Relays are premium ultra low power 50mW coil types
- drop in replacement for USB-RLY08
- Relay current up to 1A
SPECIFICATIONS
Relays8
PowerPowered from standard USB bus
Control InterfaceUSB
Relay CurrentUp to 1A @ 30VDC or 60VAC. 500mA @ 110 VAC. 250mA @ 250VAC
ConnectionsScrew Terminals for N/O N/C and Common contacts